TM 5-5420-234-14&P
4-35. BAP FRONT PIN LOCK ASSEMBLY ADJUSTMENT AND REPAIR (continued).
(6) Install breather (27) on air cylinder (16).
(7) Install adjusting nut (26) and clevis (24) on air cylinder (16).
(8) Install air cylinder (16) in pin lock guide (6), making sure pin lock jaw (34) is in the up position and
breather (27) is facing bottom of pin lock guide (6).
(9) Install nut (25) on air cylinder (16). Install air hose (1) on air cylinder (16). Tighten clamp (15).
(10) Install release latch (18) on clevis (24).
(11) Install straight pin (23) and two snaprings (22) in clevis (24) and release latch (18).
(12) Install release latch (18), headed
straight pin (21), washer (20), and
new cotter pin (19) on pin lock
21
18
guide (6). Install two springs (17)
20
on release latch (18) and pin lock
guide (6).
17
(13) Install air cylinder guard (14) and
two new lockwashers (13) and
bolts (12) on pin lock guide (6).
21
6
23
22
24
25
13
15
12
1
14
16
26
27
4-464
