TM 5-5420-234-14&P
4-35. BAP FRONT PIN LOCK ASSEMBLY ADJUSTMENT AND REPAIR (continued).
(4) Measure wear pad (37). If wear pad (37) is worn to within 1/16 inch (1.6 mm) of screw (35) or pin lock
jaw (34), wear pad (37) can be rotated 180
37
degrees and reused. If bottom and top edges
of wear pad (37) show excessive wear,
replace wear pad (37).
(5) Lubricate all pins in accordance with
35
d. Assembly.
34
NOTE
Mount pin lock bracket at same height
as noted during disassembly.
(1) Install pin lock bracket (5) and four screws (41) and
washers (42) on frame (3). Torque screws between
75 and 80 ft-lb (101.7 and 108.5 Nm).
3
5
42
41
4-462
