TM 5-5420-234-14&P
4-35. BAP FRONT PIN LOCK ASSEMBLY ADJUSTMENT AND REPAIR (continued).
(9) Remove cotter pin (28), washer (29), pivot latch (11), and torsion spring (30) from pin lock guide (6).
Discard cotter pin.
(10) Remove cotter pin (31), washer (32), and headed straight pin (33) from pin lock jaw (34). Discard cotter
pin.
(11) Remove pin lock jaw (34) from pin lock guide (6).
(12) Remove two screws (35) and self-locking nuts (36) and wear pad (37) from pin lock jaw (34). Discard
self-locking nuts.
NOTE
Measure the distance from the top of triangle-shaped weldment on top of pin
lock bracket to top of frame. Make a note of distance measured for later use
during assembly.
37
35
36
6
34
33
32
11
30
31
29
28
(13) Remove two cotter pins (38) from pin lock pin (39). With the aid of an assistant, remove two washers
(40) and pin lock pin (39) from pin lock guide (6). Discard cotter pins.
4-460
