TM 5-5420-234-14&P
This task covers:
a. Removal
c. Cleaning and Inspection
e.
Installation
b. Disassembly
d. Assembly
f.
Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Cotter Pin (2) (Item 19, Appendix K)
Pliers, Retaining Ring (SG 2086PC32)
Cotter Pin (2) (Item 43, Appendix K)
Tool Kit, General Mechanic's: Automotive
Lockwasher (Item 30, Appendix K)
(SC 5180-90-N26)
Lockwasher (2) (Item 31, Appendix K)
Wrench, Adjustable (2117080)
Self-Locking Nut (2) (Item 39, Appendix K)
Wrench, Torque, 50-250 ft-lb (STW-3RCF)
Personnel Required
Materials/Parts
Two
Drycleaning Solvent (Item 13, Appendix E)
Goggles, Safety (Item 16, Appendix E)
Equipment Condition
Rag (Item 21, Appendix E)
Front pin lock reflector removed (para 4-33)
Cotter Pin (Item 17, Appendix K)
a. Removal.
NOTE
BAP front pin lock should be in stowed position for Steps 1 through 3.
Repair of curb-side and road-side pin locks is the same. Road-side pin lock
is shown.
(1) Remove air hose (1) from elbow (2) on BAP frame (3).
(2) Disengage extension spring (4) from pin lock bracket (5) and front pin lock guide (6).
6
1
4
2
5
3
