TM 5-5420-234-14&P
4-35. BAP FRONT PIN LOCK ASSEMBLY ADJUSTMENT AND REPAIR (continued).
(3) Remove bolt (7), lockwasher (8), and two washers (9 and 10) from pivot latch (11). Discard lockwasher.
b. Disassembly.
11
10
9
8
7
Discard lockwashers.
(2) Loosen clamp (15) on air hose (1) and remove air hose (1) from air cylinder (16).
(3) Remove two springs (17) from release latch (18) and pin lock guide (6). Remove cotter pin (19), washer
(20), and headed straight pin (21) from pin lock guide (6). Discard cotter pin.
WARNING
Wear safety goggles and use care when removing or installing snaprings. They are
under tension and can act as projectiles when released. Failure to heed this warning
can result in serious injury to personnel.
(4) Remove two snaprings (22) and straight pin (23) from clevis (24). Remove clevis (24) from release latch
(18).
(5) Remove release latch (18) from pin lock guide (6).
(6) Loosen nut (25) and remove air cylinder (16) from pin lock guide (6).
4-458
