TM 5-5420-234-14&P
This task covers:
a. Removal
b. Installation
c . Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
EquipmentCondition
Tool Kit, General Mechanic ' s: Automotive
Load removed from the BAP (para 2-12)
(SC 5180-90-N26)
BAP unloaded from the CBT (para 2-10)
Materials/Parts
Lockwasher (2) (Item 29, Appendix K)
NOTE
There are eight reflectors on the BAP: Four amber reflectors are located on
the A-frame and front pin locks, and four red reflectors are located on the rear
guides.
a . Removal.
(1) Remove two screws (1), nuts (2), and lockwashers (3) and amber reflector (4) from A-frame (5). Discard
5
4
1
3
2
7
Change 3
