TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
NOTE
Do steps (2) through (5) for Model A. Do steps (5.1)
through (5.3) for Model B.
(2)
Install preformed packing (3) on
subassembly (4).
(3)
Install subassembly (4) in plate (5).
(4)
Install two preformed packings (6), plate (7)
with four lockwashers (8) and screws (9).
(5)
Install two preformed packings (10) and
plugs (11) in plate (7).
(5.1) Install spring (3.1), bushing (4.1),
spring (5.1), and subassembly (6.1) in port of
control (7.1).
(5.2) Install preformed packing (8.1) on control
housing (9.1).
(5.3) Install control housing (9.1) with four
screws (10.1).
Change 2
16-54.3
