TM 9-2320-279-34-2
Winch Maintenance lnstructions (Cont)
16-14.1
HEAVY-DUTY WINCH HYDRAULIC MOTOR (P/N 73077) REPAIR (CONT).
NOTE
Lockwashers are only used on Model A.
(6)
Install lens (12), gasket (13), and plate (5)
with eight lockwashers (14) and screws (15).
NOTE
Use same shims removed during disassembly.
If replacement is necessary, use shim pack
provided with motor.
Do steps (7) through (9) for Model A. Do
steps (10) and (11) for Model B.
(7)
Install shims (16) and preformed
packing (17) in motor (2).
(8)
Install seal (18) in cover (19).
WARNING
Wear safety glasses when installing snap ring.
Ring may come off causing personal injury
(9)
Install cover (19) and snap ring (20).
(10)
Install seal ring (16.1) and preformed
packing (17.1) in flange (18.1).
(11)
Install flange (18.1) on motor (19.1) with four
screws (20.1).
d.
Follow-on Maintenance. Check operation of motor,
END OF TASK
16-54.4
Change 2
