TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
16-14. HEAVY-DUTY WINCH HYDRAULIC MOTOR REPAIR (M984) (CONT).
(26) Install balance ring (23) in spring holes of valve
housing (18).
(27) Apply pressure to side of balance ring (23) to hold in
place.
NOTE
Insert knife through hole in
valve housing to keep balance
ring in place.
(28) Install valve housing (18)
against valve plate (15).
(29) Install four screws (24).
Tighten screws to 50 lb-ft
(68 N.m) in sequence shown.
(30) Install two steel balls (25),
springs (26), preformed
packings (27), and check
plugs (28) in valve
housing (18).
(31) Coat preformed packing (29)
with grease and install on
plug (30).
(32) Install plug (30) in valve
housing (18).
16-52
