TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
(10)
Remove seal nut (23) and seal washer (24) from end cap (8).
(11)
Remove preformed packing (25), support ring (26), valve spool (27), valve sleeve (28), preformed
packing (29), nine piston rings (30), spring seat (31), compression spring (32), spring seat (33),
compression spring (34), spring guide (35), and adjusting screw (36) from end cap (8).
(12)
Remove expanding plug (37), setscrew (38),
expanding plug (39), and performed packing
(40) from end cap (8).
NOTE
Matchmark end cap and bearing housing assembly.
(13)
Remove eight screws (41) and end cap (8)
from bearing housing assembly (42).
Change 2
16-54.7
