TM 9-2320-279-34-2
15-34
Change 3
Cab and Body Maintenance Instructions (Cont)
15-6. STATIC GROUND REEL REPAIR (M978) (CONT).
(28)
Install reel (37) on frame (33).
(29)
Install arm positioner (38), guide
arm (39), lockwasher (40), and
lockwasher (41). Aline guide arm with
matchmarks on frame (33) and install
nut (42).
(30)
Install screw (43) and washer (44)
through guide arm (39) and cable
guide (1).
(31)
Check measurement from top of cable
guide (1) to bottom of frame (33).
Measurement should be 17.0 in.
(431.8 mm).
(32)
Check measurement from center of
pawl (32) to center of reel.
Measurement should be approximately
3.5 in. (89 mm).
(33)
If measurements in steps (31)
and/or (32) are incorrect, disassemble
reel and correct.
d. Follow-on Maintenance. None.
END OF TASK
Supplies
Adhesive-sealant, silicone, Item 6, Appendix C
Compound, sealing, pipe thread, Item 29,
Appendix C
Solvent, drycleaning, Item 57, Appendix C
This task covers:
a. Disassembly
c. Assembly
b. Cleaning/Inspection
d. Follow-on Maintenance
INITIAL SETUP
Personnel Required
MOS 63W, Wheel vehicle repairer
Equipment Condition
TM or Para
Condition Description
H1 or H2 fuel transfer
hose reel on clean work
surface.
References
None
Special Tools
None
15-7. H1 AND H2 FUEL TRANSFER HOSE REEL REPAIR (M978)
Models
M978
Test Equipment
None
Special Environmental Conditions
None
General Safety Instructions
No smoking, flame, sparks, and hot or glowing
objects within 50 ft (15 m) of fuel transfer hose
reel.
Level of Maintenance
Direct Support
