TM 9-2320-279-34-2
Change 3
15-33
Cab and Body Maintenance Instructions (Cont)
(20) Install spacer (27) on hub shaft (14).
(21) Aline front disk assembly (25) on reel
drum (11) and install with six
screws (28).
(22) Install shim spacer (29).
(23) Install cable (30) on reel drum (11).
NOTE
There are two models of static ground reels.
For Model B, do step (23.1) and steps (28)
through (33). For Model A, do steps (23.2)
through (33).
(23.1) Install ratchet locking assembly (30.1)
with four screws (30.2).
(23.2) Apply light coating of oil to needle
bearing (31) and shaft of pawl (32).
(24) Install needle bearing (31) and pawl (32)
in frame (33).
(25) Install retaining ring (34).
NOTE
Pawl must be point up when installing cotter
pin to ensure proper operation of ratchet.
(26) Install cotter pin (35) in pawl (32).
(27) Install spring (36) in cotter pin (35) and
frame (33).