TM 9-2320-279-34-2
(13)
(14)
(15)
(16)
Cab and Body Maintenance Instructions (Cont)
Position pinion bearing (32) on front frame (26) and install screws (33) and lockwashers (34).
Insert threaded end of pinion shaft (35) through pinion bearing (32) and install pinion gear (36)
and nut (37) on pinion shaft.
Loosen setscrew (38) in pinion shaft collar (39). Install pinion shaft collar on pinion shaft (35)
and tighten setscrew.
Install brake pad (40), brake spring (41), and brake wheel (42) on pinion bearing (32).
d. Follow-on Maintenance. None.
END OF TASK
15-8. HAV HAND ACTUATED CONTROL VALVE HOSE REEL REPAIR (M978).
This task covers:
a. Disassembly
c. Assembly
b. Cleaning/Inspection
d. Follow-on Maintenance
INITIAL SETUP
Models
M978
Test Equipment
None
Special Tools
None
Supplies
Compound, sealing, pipe thread, Item 29,
Appendix C
Solvent, dry cleaning, Item 57, Appendix C
Personnel Required
MOS 63W, Wheel vehicle repairer
References
None
Equipment Condition
TM or Para
Condition Description
HAV control hose reel on
clean work surface.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
Direct Support
15-39
