TM 9-2320-279-34-2
Cab and Body
c. Assembly.
NOTE
Both cable clamps are installed the same
way.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
Maintenance Instructions (Cont)
Slide cable guide (1) over two coated
cables (2).
Slide rubber bumper (3) over each
coated cable (2).
Install cable terminal (4) on end of each
coated cable (2).
Install cable clamp (5) on each cable
terminal (4) with screw (6).
Install washer (7) on back disk
assembly (8) with six rivets (9).
Install roller bearing (10) in washer (7).
Aline reel drum (11) with matchmarks
on back disk (8) and install with five
screws (12).
Install key (13) in hub shaft (14).
A line and install hub collar (15) on hub shaft (14).
Install spacer (16), hub shaft (14), and hub collar (15)
through back disk assembly (8).
Install shim spacer (17) and retaining ring (18).
Install setscrew (19) in hub collar (15).
15-31
