TM 9-2320-27420-2
Winches, Cranes, and Power Takeoff (PTO) Maintenance instructions (Cont)
NOTE
Some models electrical leads are connected by electrical plug and some are connected by
electrical terminals, lockwashers, and screws. If connected by electrical plug, perform
step (16). If connected by terminals, lockwashers, and screws, perform step (16.1).
(16) Connect connector (18).
(16.1) Connect two wires (23) with screws (24) and lockwashers (25).
(17)
Connect three hoses (19, 20, and 21).
(18)
Fill PTO shaft spline cavity (22) with grease.
c.
Follow-on Maintenance.
(1)
Install hydraulic pump (para 17-28.1).
(2)
Fill hydraulic reservoir (LO 9-2320-279-12).
(3)
Check operation of power takeoff (TM 9-2320-279-10).
END OF TASK
Change 2
17-145
