TM 9-2320-279-20-2
Winches, Cranes, and Power Takeoff (PTO) Maintenance Instructions (Cont)
17-28.1 HYDRAULIC PUMP REMOVAL/INSTALLATION (M984E1).
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Models
M984E1
Test Equipment
None
Special Tools
None
References
None
Equipment Condition
TM or Para
Condition Description
LO 9-2320-279-12 Hydraulic reservoir
drained.
Special Environmental Conditions
None
Supplies
Tags, identification, Item 48, Appendix C
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic
General Safety Instructions
None
a.
Removal.
(1)
Disconnect two hydraulic hoses (1) and two hydraulic hoses (2) and pull towards vehicle engine
through hole in wrecker body.
(2)
Connect hydraulic hoses (1 and 2) together.
(3)
Install dust cap (3) on fitting (4).
17-138
Change 2
