TM 9-2320-279-20-2
Winches, Cranes, and Power Takeoff (PTO) Maintenance Instructions (Cont)
17-23. REMOTE CONTROL UNIT STRAP, CONTROL KNOBS, ASSEMBLY, AND LEVERS
REMOVAL/REPAIR/INSTALLATION (M977, M984E1, M985) (CONT).
e.
(6)
(7)
(8)
(9)
Install spacer (14), insulator (15), and
switch (16) on remote controller
assembly (17) with two screws (18).
Connect switch (16) and connector (19).
Install insulator (20) and switch (21) on
remote controller assembly (17) with two
screws (22).
Connect switch (21) and connector (23).
Installation.
(1) Install handle (1) and preformed packing (2)
in remote controller assembly (3) with
screw (4).
NOTE
Replace rust vapor capsule with a new one
any time remote control unit is opened.
(2)
(3)
(4)
(5)
17-108
Install rust vapor capsule (5) in remote
control box (6),
Install gasket (7) on remote control
box (6).
Connect connector (8) and connector (9).
Install remote controller assembly (3) in
remote control box (6) with four
screws (10) and washers (11).
