TM 9-2320-279-20-2
Winches, Cranes, and Power Takeoff (PTO) Maintenance Instructions (Cont)
17-23. REMOTE CONTROL UNIT STRAP, CONTROL KNOBS, ASSEMBLY, AND LEVERS
REMOVAL/REPAIR/INSTALLATION (M977, M984E1, M985) (CONT).
(5)
(6)
(7)
Remove switch boot (11) from power
switch (12).
Remove three screws (13),
lockwashers (14), and wires (15).
Remove power switch (12) from remote
control box (16).
(8) Remove screw (17) and lockwasher (18)
from remote control box (16).
(9) Remove cap and chain (19) from
connector (20).
(10) Remove nut (21) and lockwasher (22) from
remote control box (16).
(11) Remove wiring harness (23) from remote
control box (16).
c. Cleaning/Inspection.
WARNING
Adhesives, solvents, and sealing compounds can
burn easily, can give off harmful vapors, and are
harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in
well-ventilated area. If adhesive, solvent, or
sealing compound gets on skin or clothing, wash
immediately with soap and water.
(1) Clean all metal parts in dry cleaning solvent.
(2) Inspect each part for damage.
(3) Inspect wires for cracks or breaks.
(4) Replace damaged parts or wires.
17-106
