TM 9-2320-279-20-2
Winches, Cranes, and Power Takeoff (PTO) Maintenance Instructions (Cont)
(5) Remove four screws (6), washer (7), and
remote controller assembly (8) from
remote control box (2).
NOTE
Tag and mark all connectors and wires.
(6) Disconnect connector (9) from
connector (10).
(7) Remove remote controller assembly (8)
and gasket (11) from remote control
unit (2).
(8) Remove rust vapor capsule (12) from
remote control unit (2).
(9) Remove screw (13) from handle (5).
(10) Remove handle (5) and preformed
packing (14) from remote controller
assembly (8).
b. Disassembly.
NOTE
Tag and mark all connectors, switches, and
wires before removing.
(1) Disconnect switch (1) from
connector (2).
(2) Remove two screws (3), switch (1), and
insulator (4) from controller
assembly (5).
(3) Disconnect switch (6) from
connector (7).
(4) Remove two screws (8), switch (6),
insulator (9), and spacer (10).
17-105
