TM 5-5420-234-14&P
This task covers:
a.
Removal
b. Installation
c.
Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Equipment Condition
Pan, Drain (MIL-P-45819)
Engine turned off (TM 9-2320-279-10)
Tool Kit, General Mechanic's: Automotive
Hook arm fully extended (para 2-10)
(SC 5180-90-N26)
Wheels chocked (TM 9-2320-279-10)
Materials/Parts
Special Environmental Conditions
Lubricating Oil (Item 20, Appendix E)
Cleanliness is extremely important when working
Tag, Identification (as required) (Item 23,
on hydraulic equipment. Clean all parts before
disassembly and work in a clean work area.
Lockwasher (3) (Item 91, Appendix K)
Lockwasher (2) (Item 103, Appendix K)
Personnel Required
Two
a. Removal.
(1) Position drain pan under two hoses (1 and 2).
NOTE
Tag and mark all hoses and tubes
prior to removal.
Cap and plug hydraulic hoses and
tubes upon removal.
(2) Remove two hoses (1) and (2) from bulkhead
fittings (3) at lower end of main frame (4).
(3) Remove two tubes (5) and (6) from bulkhead
fittings (3).
(4) Remove two nuts (7), lockwashers (8) and re-
move bulkhead fittings (3) from main frame (4).
7
1
8
3
5
2
6
3
7
4
8
