TM 5-5420-234-14&P
This task covers:
a.
Removal
b. Installation
c.
Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Lockwasher (2) (Item 90, Appendix K)
Pan, Drain, 4-Gallon (MIL-P-45819)
O-ring (Item 77, Appendix K)
Tool Kit, General Mechanic's:
Automotive (SC 5180-90-N26)
Equipment Condition
Wrench, Combination, 1 1/4 in. (GGG-W-636)
Engine turned off (TM 9-2320-279-10)
Wheels chocked (TM 9-2320-279-10)
Materials/Parts
Lubricating Oil (Item 20, Appendix E)
a. Removal.
NOTE
Both fittings are replaced the same way.
Place suitable drain pan under hoses prior to removal.
Cap and plug hoses upon coupling removal.
(1) Remove dust cap (1) from coupling (2).
(2) Remove couplings (2) from hose (3).
(3) Remove and discard O-ring (4) from hoses (3).
(4) Remove two screws (5), lockwashers (6), washers (7), plate (8) and two piece clamp (9) from bracket
(10). Discard lockwashers.
2
4
1
9
10
8
6
7
5
3
