TM 5-5420-234-14&P
5-21.
WINCH QUICK DISCONNECT COUPLING REPLACEMENT (continued).
b. Installation.
(1) Position hose (3) in two piece clamp (9) and install two piece clamp (9) on bracket (10) with plate (8), two
washers (7), new lockwashers (6), and screws (5).
NOTE
Coat O-rings with clean hydraulic oil prior to installation.
(2) Install new O-ring (4) on hose (3).
(3) Install coupling (2) on hose (3).
(4) Install dust cap (1) on coupling (2).
2
4
1
10
9
8
6
7
5
3
c. Follow-on Maintenance:
Remove wheel chocks (TM 9-2320-279-10).
END OF TASK
5-132
