TM 5-5420-234-14&P
This task covers:
a.
Removal
b. Installation
c.
Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Hook arm down proximity switch removed
Lifting Device, Minimum Capacity 115 lb
(552.2 kg)
Left-hand linking harness removed
Tool Kit, General Mechanic's:
Automotive (SC 5180-90-N26)
Right-hand linking harness removed
Materials/Parts
Hydraulic cabinet cover removed (para 4-60)
Locknut (6) (Item 53, Appendix K)
Main junction box removed (para 4-61)
Workstation assembly removed (para 4-48)
Personnel Required
Main manifold block removed (para 5-29)
Two
Tool storage bracket removed (para 4-59)
Equipment Condition
Hand-held spotlight harness removed (para 4-77)
a. Removal.
WARNING
Support frame weighs 115 lb (52.2 kg). Attach suitable lifting device prior to removal
to prevent possible injury to personnel.
(1) Attach lifting device to main manifold support frame (1).
(2) Remove six locknuts (2) and screws (3) from main manifold support frame (1). Discard locknuts.
CAUTION
Use extreme care when removing main manifold support frame to avoid damage to
loose hoses and wire harnesses.
(3)
With aid of an assistant and using lifting device, remove main manifold support frame (1) from
compression frame (4).
(4) Remove lifting device from main manifold support frame (1).
b. Installation.
(1) Attach lifting device to main manifold support frame (1).
