TM 5-5420-234-14&P
This task covers:
a.
Removal
b. Installation
c.
Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
O-ring (4) (Item 78, Appendix K)
Pan, Drain, 4-Gallon (MIL-P-45189)
O-ring (2) (Item 79, Appendix K)
Tool Kit, General Mechanic's: Automotive
O-ring (4) (Item 80, Appendix K)
(SC 5180-90-N26)
O-ring (4) (Item 81, Appendix K)
Wrench, Combination, 1 1/4-in. (1173)
Seal Kit (Item 113, Appendix K)
Wrench, Combination, 1 1/2-in. (1178)
Equipment Condition
Materials/Parts
Relief valve removed (para 5-26)
Lubricating Oil (Item 20, Appendix E)
Winch relief valve removed (para 5-27)
Tag, Identification (as required) (Item 23,
Directional control valves removed (para 5-25)
Free flow valve and coil removed (para 5-28)
Lockwasher (6) (Item 89, Appendix K)
a. Removal.
NOTE
Cap and plug all hoses and fittings upon removal.
Place drain pan under main manifold block to catch excess oil.
Tag and mark all connectors, hoses and adapters prior to removal.
Screws in bracket may need to be loosened if oil temperature sending unit
does not remove easily.
(1) Pull oil temperature sending unit (1) out from main manifold block (2) and bracket (3).
5
4
7
6
8
10
2
3
1
9
10
11
Change 1
