TM 5-5420-234-14&P
This task covers:
a.
Removal
b. Installation
c.
Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Tag, Identification (as required) (Item 23, Appendix E)
Tool Kit, General Mechanic's: Automotive
Lockwasher (4) (Item 104, Appendix K)
(SC 5180-90-N26)
Equipment Condition
Materials/Parts
Batteries disconnected (TM 9-2320-279-20)
Cable Ties (Item 8, Appendix E)
a. Removal.
1
NOTE
Cut cable ties as required.
Tag and mark all connectors, wires and connection
2
points prior to removal to ensure proper installation.
(1) Open hydraulic cabinet cover (1).
3
(2) Loosen four screws (2) and open
junction box cover (3).
(3) Remove cap (4) from connector (5).
(7), screws (8), connector (5) and
cap (4) from bracket (9). Discard
4
8
6
7
5
~
9
4
Change 1
