TM 5-5420-234-14&P
This Task Covers:
e. Follow-on Maintenance
c. Right Front Compression Frame
a. Left Front Compression Frame
Mounting Bracket Removal
Mounting Bracket Removal
d. Right Front Compression Frame
b. Left Front Compression Frame
Mounting Bracket Installation
Mounting Bracket Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools
Compression frame removed (para 5-14)
Tool kit, General Mechanic's:
Left fuel tank removed (for left side bracket only)
Automotive (SC 5180-90-N26)
(TM 9-2320-279-20-1)
Materials/Parts
Locknut (11) (Item 54, Appendix K)
Locknut (3) (Item 56, Appendix K)
a. Left Front Compression Frame Bracket Removal.
Remove eight locknuts (1), four 4.00 in. (102 mm) screws (2), 3.75 in. (95 mm) screws (3), eight washers (4),
spacers (5), and left front compression frame mounting bracket (6) from frame (7). Discard locknuts.
b. Left Front Compression Frame Bracket Installation.
(1)
Install left front compression frame bracket (6) on frame (7) with four 4.00 in. (102 mm) screws (2),
3.75 in. (95 mm) screws (3), eight washers (4), spacers (5), and new locknuts (1).
(2)
Tighten locknuts to 210 lb-ft (285 Nm).
Change 2
