TM 5-5420-234-14&P
This task covers:
a.
Removal
b. Installation
c.
Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools:
Personnel Required
Lifting Device, Minimum Capacity 835 lb
Two
(379 kg)
Tool Kit, General Mechanic's: Automotive
Equipment Condition
(SC 5180-90-N26)
Front BAP locks removed (para4-57)
Wrench, Torque, 50-250 ft-lb (STW-3RCF)
Main LHLS harness removed (para 4-86
Compression frame hydraulic hoses
Materials/Parts:
removed (para 5-17)
Adhesive, Loctite 271 (Item 4, Appendix E)
Winch (compression frame) hydraulic tubes
Lubricating Oil (Item 20, Appendix E)
removed (para 5-19)
Locknut (4) (Item 51, Appendix K)
Rubber bumpers removed (para 4-58)
Locknut (6) (Item 56, Appendix K)
Main frame removed (para 5-11)
Locknut (2) (Item 60, Appendix K)
Main frame manifold removed (para 5-24)
Lockwasher (4) (Item 26, Appendix K)
Main manifold support frame removed (para 5-15)
Lockwasher (2) (Item 36, Appendix K)
Lockwasher (2) (Item 74, Appendix K)
Spring Washer (16) (Item 64, Appendix K)
a. Removal.
(1) Remove two locknuts (1), screws (2), and ground strap (3) from frame (4) and compression frame (5).
Discard locknuts.
1
5
2
1
3
2
~
4
