TM 5-5420-234-14&P
5-8. FRONT COMPRESSION FRAME MOUNTING BRACKET REPLACEMENT
(continued).
c. Right Front Compression Frame Mounting Bracket Removal.
(1)
Remove three locknuts (1), 4.00 in. (102 mm) screws (2), washers (3), and spacers (4).
Discard locknuts.
(2)
Remove three locknuts (5), 3.75 in. (95 mm) screws (6), washers (7), spacers (8), and right front
compression frame bracket (9) from frame (10). Discard locknuts.
d. Right Front Compression Frame Mounting Bracket Installation.
(1)
Install right front compression frame mounting bracket (9) to frame (10) with three 4.00 in. (102 mm)
screws (2), washers (3), spacers (4), and new locknuts (1).
(2)
Install three 3.75 in. (95 mm) screws (6), washers (7), spacers (8), and new locknuts (5).
(3)
Tighten locknuts (1) to 410 lb-ft (556 Nm).
(4)
Tighten locknuts (5) to 210 lb-ft (285 Nm).
e. Follow-on Maintenance:
Install left fuel tank (for left side bracket only) (TM 9-2320-279-20-1).
Install compression frame (para 5-14).
END OF TASK
Change 2
5-76.1/(5-76.2 blank)
