TM 5-5420-234-14&P
5-4.
BAP WINCH REPAIR (continued).
d. Brake Housing Removal.
(1) Remove 16 screws (34) and lockwashers (35) and two tie bars (36) from brake housing (5) and final
housing (26). Discard lockwashers.
(2) With the aid of an assistant, remove brake housing (5) from cable drum (37).
NOTE
Cylindrical roller bearing comes apart with the brake housing, and the cylindrical
roller race remains in the cable drum. Remove cylindrical roller bearing from brake
housing only if damaged.
(3) Remove spacer (38) and cylindrical roller bearing (39), if damaged, from brake housing (5). Discard
spacer.
26
37
38
39
5
34
35
36
35
34
e. Cable Drum Assembly Removal.
(1) Remove oil seal (40) from cable drum (37). Discard oil seal.
NOTE
Remove cylindrical roller race only if damaged.
(2) If damaged, remove cylindrical roller race (41) from cable drum (37).
(3) Remove primary sungear (42) and shim (43) from primary drive planetary gear (44).
5-60
