TM 5-5420-234-14&P
5-4.
BAP WINCH REPAIR (continued).
i.
Final Drive Assembly Installation.
WARNING
Wear safety goggles and use care when installing snapring. It is under spring tension
and can act as a projectile when released. Failure to heed this warning can result in
serious injury to personnel.
(1) Install snapring (32) in final housing (26).
(2) Install final drive planetary gear (31) in final housing (26).
(3) Install final sungear shaft (30) in final drive planetary gear (31), with longer splined end first, making sure
final sungear shaft (30) engages with final drive planetary gear (31).
(4) Install sungear stopper (29), stopper (28), and new O-ring (27) on end cover (25).
NOTE
When installing end cover, be sure to align marks previously made during removal.
(5) Install end cover (25) on final housing (26).
WARNING
Wear safety goggles and use care when installing cover retainer. It is under spring
tension and can act as a projectile when released. Failure to heed this warning can
result in serious injury to personnel.
26
(6) Install cover retainer (24) on end cover
(25). Make sure lip end of retainer
aligns with nail hole at top of final
32
31
housing (26).
30
27
28 29
25
24
5-65
