TM 5-5420-234-14&P
5-4.
BAP WINCH REPAIR (continued).
h. Brake Housing Installation.
(1) Install new spacer (38) on brake housing (5).
NOTE
Remove cylindrical roller race from new cylindrical roller bearing before installing
cylindrical roller bearing.
(2) If removed, install new cylindrical roller bearing (39) on brake housing (5) using an arbor press.
(3) With the aid of an assistant, install brake housing (5) on cable drum (37), making sure the two tie bars (36)
align from brake housing (5) to final housing (26).
(4) Install two tie bars (36) and 16 screws (34) and new lockwashers (35) on brake housing (5) and cable
drum (37). Torque screws to 50 lb-ft (68 Nm).
26
37
38
39
5
34
35
36
35
34
5-64
