TM 5-5420-234-14&P
5-4.
BAP WINCH REPAIR (continued).
c. Final Drive Assembly Removal.
WARNING
Wear safety goggles and use care when removing cover retainer. It is under spring
tension and can act as a projectile when released. Failure to heed this warning can
result in serious injury to personnel.
(1) Remove cover retainer (24) from end cover (25).
NOTE
Match-mark end cover and its location on the winch so end cover can be installed
at the same angle as when removed.
(2) Remove end cover (25) from final housing (26).
(3) Remove O-ring (27), stopper (28), and sungear stopper (29) from end cover (25). Discard O-ring.
(4) Remove final sungear shaft (30) and final drive planetary gear (31) from final housing (26).
WARNING
Wear safety goggles and use care when removing snapring. It is under spring tension
and can act as a projectile when released. Failure to heed this warning can result in
serious injury to personnel.
(5) Remove snapring (32) and bearing retainer (33) from final housing (26).
26
33
32
31
30
27
28
25
29
24
5-59