TM 5-5420-234-14&P
4-65.1
REAR CLEARANCE LIGHT REPLACEMENT (MODEL B ONLY) (continued).
(3)
Remove light emitting diode (4).
CBTF10236
NOTE
Side marker lights will have two ground wires.
(4)
Remove two nuts (5), screws (6), ground
wires (7 and 8), mounting base (9), mounting
gasket (10), and pigtail (11).
b. Installation.
NOTE
Side marker lights will have two ground wires.
CBTF10237
(1)
Install mounting gasket (1), mounting base (2),
pigtail (3), two ground wires (4 and 5), screws
(6), and nuts (7). Tighten nuts.
(2)
Install light emitting diode (8).
(3)
Install outer bracket (9) and two screws (10).
(4)
Connect wire (11).
BTF10238
c. Follow-on Maintenance:
Remove wheel chocks (TM 9-2320-279-10).
END OF TASK
Change 3
