TM 5-5420-234-14&P
4-65. REAR MARKER LIGHT AND MOUNTING BRACKET REPLACEMENT
(MODEL A ONLY) (continued).
(4) Remove six screws (8) and three lenses (9) from three light assemblies (11).
(5) Disconnect three connectors (10) from harness (16).
(6) Remove six screws (12), three light assemblies (11) and three gaskets (13) from light bar bracket (7).
(7) Remove two screws (14), clips (15) and harness (16) from light bar bracket (7).
14
16
15
7
10
11
9
8
13
12
4
7
3
b. Installation.
(1) Install harness (16) on light bar bracket (7)
with two clips (15) and screws (14).
(2) Install three gaskets (13) and light assemblies
(11) on light bar bracket (7) with six screws
(12).
(3) Connect three connectors (10) to harness (16).
1
(4) Install three lenses (9) on three light assemblies
(11) with six screws (8).
(5) Install light bar bracket (7) on vehicle (8) with
two washers (6), new lockwashers (5), screws
(4), grounding washers (3) and nuts (2).
(6) Connect connector (1).
c. Follow-on Maintenance
6
8
Remove wheel chocks (TM 9-2320-279-10).
5
2
END OF TASK
4--572
4 572
Change 1
