TM 5-5420-234-14&P
This task covers:
a.
Removal
b. Installation
c.
Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
Wheels chocked (TM 9-2320-279-10)
(SC 5180-90-N26)
Engine turned off (TM 9-2320-279-10)
Materials/Parts
Cable Ties (Item 8, Appendix E)
Tag, Identification (as required) (Item 23, Appendix E)
a. Removal.
NOTE
Cut cable ties as required.
Tag and mark wires before removal.
Model B is equipped with an additional four connectors for side clearance
lights.
(1) Disconnect four connectors (1).
(2) Remove two screws (2), clips (3) and clearance light harness (4) from light bar (5).
3
2
5
4
1
1
1
1
NOTE
Replace cable ties as required.
Model B is equipped with an additional four connectors for side clearance
lights.
b. Installation.
(1) Install clearance light harness (4) on light bar (5) with two clips (3) and screws (2).
(2) Connect four connectors (1).
c. Follow-on Maintenance:
Remove wheel chocks (TM 9-2320-279-10).
END OF TASK
Change 1
