TM 5-5420-234-14&P
(MODEL B ONLY).
This task covers:
a.
Removal
b. Installation
c.
Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Materials/Parts
Tool Kit, General Mechanic's:
Locknut (4) (Item 71, Appendix K)
Automotive (SC 5180-90-N26)
Lockwasher (4) (Item 91, Appendix K)
Equipment Condition
Wheels chocked (TM 9-2320-279-10)
Engine OFF (TM 9-2320-279-10)
Batteries disconnected (TM 9-2320-279-20)
a. Removal.
NOTE
For resistor assembly replacement only,
go to step (5).
from hydraulic cabinet cover (3). Discard
4
6
(2) Remove hydraulic cabinet cover (3) from
7
8
main junction box brackets (4).
5
(3) Loosen two allen screws (9) and remove two
wiring harness connectors (10) from digital
7
controller (8).
11
(4) Remove three screws (5) from inside of
10
9
bracket (4), one screw (6) from outside of
12
bracket (4), four self-locking nuts (7), and
digital controller (8) from bracket (4).
Discard self-locking nuts.
(5) Remove resistor (11) from wiring harness
(12).
3
4
2
1
Change 1
