TM 5-5420-234-14&P
4-60. HYDRAULIC CABINET COVER REPAIR (MODEL A ONLY) (continued).
(8) Remove two nuts (11) and ball studs (8) from hydraulic cabinet cover (2).
(9) Remove two locknuts (12), screws (13), bracket (14) and spacer (15) from hydraulic cabinet cover (2).
Discard locknuts.
(10) Remove four locknuts (16), screws (17) and two brackets (18) from hydraulic cabinet cover (2). Discard
locknuts.
NOTE
Perform Step 11 only if damaged.
(11) Remove and discard four rivets (19) and data plate (20) from hydraulic cabinet cover (2).
13
17
14
20
15
2
18
19
12
16
8
b. Installation.
11
NOTE
Perform Step 1 only if data plate was removed during removal.
(1) Install data plate (20) on hydraulic cabinet cover (2) with four new rivets (19).
(2) Install two brackets (18) on hydraulic cabinet cover (2) with four screws (17) and new locknuts (16).
(3) Install spacer (15) and bracket (14) on hydraulic cabinet cover (2) with two screws (13) and new locknuts
(12).
(4) Install two ball studs (8) in hydraulic cabinet cover (2) with two nuts (11).
(5) With help from an assistant, install hydraulic cabinet cover (2) on bracket (7) with two screws (10) and
new locknuts (9).
4-554
Change 1
