TM 5-5420-234-14&P
4-52. LHS HORIZONTAL ROLLER REPLACEMENT (continued).
(2) Remove lube fitting (2), bend lockwasher tab
out of locknut slot and remove locknut (3),
lockwasher (4) and thrust washer (5) from
roller (6) at underside of roller assembly (1).
Discard lockwasher and locknut.
6
lockplate (9) and lube fitting (10) from roller
assembly (1). Discard lockwashers.
(4) Attach lifting device to horizontal roller (6).
NOTE
4
Horizontal roller weighs 75 lb (34 kg).
1
Attach suitable lifting device prior to
2
5
3
removal to prevent possible injury to
personnel.
(5) Using lifting device, remove horizontal roller
(6) from roller assembly (1).
(6) Remove lifting device from horizontal roller
8
(6).
7
b. Installation.
(1) Attach lifting device to horizontal roller (6).
NOTE
9
Horizontal roller weighs 75 lb (34 kg).
10
Attach suitable lifting device prior to
1
installation to prevent possible injury
to personnel.
1
LIFTING
(2) Using lifting device, position horizontal roller
DEVICE
(6) in roller assembly (1).
screws (7) and lube fitting (10) in roller
assembly (1).
6
4--534
4536
