TM 5-5420-234-14&P
4-51. LHS REAR ROLLER ASSEMBLY REPLACEMENT (continued).
NOTE
Model B trucks are equipped with two spacer plates between rear roller
assembly and mounting bracket.
(3) With the aid of an assistant, guide rear roller assembly (1) up and off of truck.
(4) Remove lifting device from rear roller assembly (1).
LIFTING
DEVICE
2
1
1
MODEL A SHOWN
MODEL A SHOWN
3
b. Installation.
WARNING
Rear roller assembly weighs 375 lb (170 kg). Attach suitable lifting device prior to removal or
installation to prevent possible injury to personnel.
(1) Attach lifting device to rear roller assembly (1).
NOTE
Model B trucks are equipped with two spacer plates on each side. Position
and align prior to lowering rear roller assembly onto truck.
(2) With the aid of an assistant, lower rear roller assembly (1) onto truck.
(3) Install six screws (3) and locknuts (2) in rear roller assembly (1).
(4) Remove lifting device from rear roller assembly (1).
c. Follow-on Maintenance:
Lubricate rollers (Appendix G).
Remove wheel chocks (TM 9-2320-279-10).
END OF TASK
4-534
2
Change 1
