TM 5-5420-234-14&P
4-42. BAP TRANSLOAD ROLLER HYDRAULIC SYSTEM REPAIR (continued).
NOTE
For removal of hoses and fittings from curb side only, do Step 4 and then go
to Step 8. For road side only, skip Steps 4 and 5 and go to Step 6.
(4) Remove hose (14) from two fittings (15 and 16). Remove fitting (15) from manifold (17). Remove
fitting (16) from frame (18).
(5) Remove plug (19) and O-ring (20) from manifold (17). Remove two screws (21), lockwashers (22), and
washers (23) and manifold (17) from frame (18). Discard lockwashers and O-ring.
14
16
19
15
20
18
18
22 23
21
17
29
(6) Remove tube (24) from fitting (25) and
tee (26). Remove fitting (25) from
manifold (13).
(7) Remove tube (27) from tee (26) and
18
fitting (28). Remove fitting (28) from
hand pump (29).
(8) Remove tube (30) from tee (26) and
30
fitting (31). Remove fitting (31) from
frame (18).
31 35
(9) Remove two screws (32), lockwashers
24
(33), and washers (34) and manifold
36
(13) from frame (18). Remove plug
(35) and O-ring (36) from manifold (13).
Discard lockwashers and O-ring.
26
32
28
25
27
33
34
13
18
4-499
