(73)
(74)
(75)
(76)
(77)
(78)
(79)
TM 9-2320-279-34-3
Special Purpose Kit Installation Instructions (Cont)
Remove one nut (145) from coolant
pump switch (146). Adjust remaining
nut to provide proper height of switch
when installed in heater compartment
cover (130).
Install coolant pump switch (146) in
heater compartment cover (130) with
nut (145).
Remove two screws (147) from coolant
pump switch (146).
Install three wires (78), (136), and (148)
on output side of coolant pump
switch (146) with screw (147).
Install wire (149) on input side of
coolant pump switch (146) with
remaining screw (147).
Remove nut (150) and washer (151)
from circuit breaker No. 4 (152).
Install wire (149) on circuit breaker
No. 4 (152) with washer (151) and
nut (150).
Change 3
23-19
