TM 9-2320-279-34-3
Special Purpose Kit Installation Instructions (Cont)
23-3. MACHINE GUN RING KIT INITIAL INSTALLATION (CONT).
(11)
(12)
(13)
(14)
Using suitable lifting device, position
machine gun ring (25) on gun ring rear
support (7) and support assembly (12).
Install machine gun ring (25) to
support assembly (12) with eight
screws (26), washers (27), and
locknuts (28). Do not tighten.
Install machine gun ring (25) to gun
ring rear support (7) with four
screws (26), washers (27), and
locknuts (28).
Tighten 12 screws (26) and
locknuts (28).
(15) Remove eight screws (29) and heater
compartment cover (30).
23-28
