TM 9-2320-279-34-3
Special Purpose Kit Installation Instructions (Cont)
Adhesives, solvents, and sealing compounds
can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid
injury or death, keep away from open fire and
use in well-ventilated area. If adhesive,
solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
NOTE
Ensure that rubber mounting surface of door
is clean.
(56)
Apply adhesive (Item 5.4, Appendix C)
to rubber (125) and install on door
(126). Apply hand pressure until
adhesive sets.
(57)
Install door (126) on hinge (121) with
four screws (127), lockwashers (128),
and nuts (129).
(58)
Ensure that valve (72) is in open
position.
Change 3
23-17
