(5)
(6)
TM 9-2320-279-34-3
Special Purpose Kit Installation Instructions (Cont)
Install gun ring rear support (7) on tire carrier (8) with 12 screws (9), washers (10), and
locknuts (11).
Install front support
channel (12) to supports (13
and 14) with four
screws (15), washers (16),
lockwashers (17), and
nuts (18).
NOTE
Two nuts, washers, and
screws must be removed from
the front of the skid plate
before positioning support
assembly on skid plate. These
two nuts, washers, and screws
will be used to install the
support assembly. Other
screws for installation are
provided with the kit.
(7)
(8)
(9)
(10)
Remove two nuts (19),
washers (20), and
screws (21).
Using suitable lifting device,
position support
assembly (12) on vehicle.
Install support
assembly (12) with four
screws (21), washers (20),
and nuts (19).
Install four screws (22) with
washers (23) and nuts (24).
23-27
