TM 9-2320-279-24-3
Special Purpose Kit Installation Instructions (Cont)
23-2.
ARCTIC HEATER KIT INITIAL INSTALLATION (CONT).
(59)
(60)
(61)
(62)
(63)
(64)
(65)
(66)
(67)
(68)
(69)
(70)
(71)
(72)
Install utility outlet on heater compartment
cover (130) (TM 9-2320-279-20).
If removed, install gas particulate switch on
heater compartment cover (130)
(TM 9-2320-279-20).
If removed, install chemical alarm switch on
heater compartment cover (130)
(TM 9-2320-279-20).
Install PTO indicator light assembly and
switch on heater compartment cover (130)
(TM 9-2320-279-20).
Install data plate (131) on heater
compartment cover (130) with four
screws (132).
Install receptacle (133) with washer (134)
and nut (135).
Install wire (136) in receptacle (133) and
tighten screw (137).
Remove shield (138).
Remove lens (139) from housing (140).
Remove force ring (141) from lens.
Remove nut (142) from housing (140).
Install housing (140) in heater compartment
cover (130) with nut (142).
Install force ring (141) in lens (139) and
install lens in housing (140).
Install shield (138).
Attach ground wire (143) to PTO ground wire
No. 35 with electrical butt connector (144).
23-18
Change 3
