TM 9-2320-279-34-3
Special Purpose Kit Installation Instructions (Cont)
Adhesives, solvents, and sealing compounds
can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid
injury or death, keep away from open fire and
use in well-ventilated area. If adhesive,
solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
NOTE
Ensure that surface of bracket is clean.
(d)
Apply adhesive (Item 5.3,
Appendix C) to rubber (81) and
install on bracket (82). Apply hand
pressure until adhesive sets.
(e)
Install bracket (82) with two
screws (83) and nuts (84). Do not
tighten nuts.
(f)
Install hose (53) on elbow (71) with
clamp (85).
(g)
Install 8 in. (203 mm) hose (86) on
elbow (74) with clamp (87).
(h)
Tighten nuts (84).
Change 3
23-13
