TM 9-2320-279-34-1
Transmission Maintenance Instructions (Cont)
7-21. MODULATOR VALVE REMOVAL/INSTALLATION.
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Models
References
All
None
Test Equipment
None
Special Tools
None
Supplies
Tags, identification, Item 60, Appendix C
Personnel Required
MOS 63W, Wheel vehicle repairer
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10 Shut off engine.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
Direct Support
a.
Removal.
NOTE
Tag and mark hose before disconnecting.
(1)
Disconnect hose (1) from modulator valve (2).
(2)
Remove screw (3), bracket (41, modulator valve (2), preformed packing (5), and pin (6).
b.
Installation.
(1)
Install pin (6), preformed packing (5), modulator valve (2), bracket (4), and screw (3).
(2)
Tighten screw (3) to 10 to 13 lb-ft (14 to 18 N•m).
(3)
Connect hose (1) to modulator valve (2).
c.
Follow-on Maintenance. None.
END OF TASK
Change 3
7-153
