TM 9-2320-279-34-1
Transmission Maintenance Instructions (Cont)
a.
Removal.
(1)
Remove four screws (1), cover (2), and gasket (3) from transmission (4).
(2)
Turn governor (5) clockwise and remove from transmission (4).
b.
Installation.
(1)
Turn governor (5) counterclockwise in port (6) to install.
(2)
Aline holes in gasket (3) and cover (2) with holes in port (6).
(3)
Install four screws (1), cover (2), and gasket (3) in transmission (4). Tighten screws to 10 to
13 lb-ft (14 to 18 N•m).
c.
Follow-on Maintenance. Connect batteries (TM 9-2320-279-20).
END OF TASK
Change 3
7-157/(7-158 blank)
