TM 9-2320-279-34-1
7-152.2
Change 5
Transmission Maintenance Instructions (Cont)
7-20. CONTROL VALVE BODY REMOVAL/REPAIR/INSTALLATION (CONT).
(1.3) Install control valve body
(1) and transfer plate (2), making
sure shift rack pin (3) engages
slot on selector valve (4).
(2)
Install three screws (5).
(3)
Install seven screws (6).
(4)
Install two screws (7) and
washers (8).
(5)
Install 15 screws (9) in control
valve body (1).
(6)
Install manual detent lever (10)
and screw (11) in control valve
body (1).
(7)
Install oil baffle (12) and two
screws (13).
(8)
Tighten screws (5, 6, 7, 9, 11,
and 13) to 8 to 12 lb-ft (11 to
16 NSm).
f.
Follow-on Maintenance.
(1)
Install lockup cutoff valve body (para 7-22).
(2)
Install modulator valve (para 7-21).
END OF TASK
