TM 9-2320-279-34-1
Transmission Maintenance Instructions (Cont)
7-8. TORQUE CONVERTER PUMP REMOVAL/REPAIR/INSTALLATION
This task covers:
a. Removal
b. Disassembly
d. Assembly
e. Installation
c. Cleaniing/Inspection
f. Follow-on Maintenance
INITIAL SETUP
Models
A l l
Test Equipment
None
Special Tools
Rear bearing installer J24447
Driver handle J24202-4
Supplies
Oil. lubricating, Item 46, Appendix C
Solvent, drycleaning, Item 57, Appendix C
General Safety Instructions
None
Personnel Required
MOS 63W. Wheel vehicle repairer
References
None
Equipment Condition
TM or Para
Condition
Description
Pat-a 7-7
Torque converter stator
removed from torque
converter housing.
Special Environmental Conditions
None
Level of Maintenance
General Support
a.
Removal.
(1)
Turn transmission so torque converter housing (1) faces up.
CAUTION
Do not scrape the ground sleeve during removal.
(2)
Remove retaining ring (2) from ground sleeve (3).
(3)
Remove Spacer (4).
7-50
Change 3
